Tire Pressure Monitoring System - Mitsubishi 2016 Outlander Manual

CAUTION
• Do not attempt to detach or disassemble the
LDW camera.
• Use only Mitsubishi Motors genuine Parts
when replacing the windshield wipers.
NOTE
 When driving conditions are not suitable to
use the LDW, turn off the LDW.
System problem warning
If a problem occurs with the system, a visual
warning specific to the type of the problem is
given together with an audible alarm.
LDW camera is too hot
The alarm shown below is displayed if the
system becomes temporarily unavailable due
to the high temperature of the LDW camera.
After the camera has cooled down, the system
will automatically return to operation.
NOTE
 The warning message can be cleared tempo-
rarily by setting the LDW switch to "OFF."
N00578100029
LDW deactivation due to fault
If the LDW is deactivated due to a malfunc-
tion in the system, the alarm shown below is
displayed. Contact your authorized Mitsubi-
shi Motors dealer for inspection of the sys-
tem.
I n f o r ma t i o n P r o v i d e d b y :

Tire pressure monitoring system

Tire pressure monitoring
system
The tire pressure monitoring system uses tire
inflation pressure sensors (A) on the wheels
to monitor the tire inflation pressures. The
system only indicates when a tire is signifi-
cantly under-inflated.
WARNING
 The compact spare wheel does not have a
tire inflation pressure sensor.
When the spare tire is used, the tire pres-
sure monitoring system will not work
properly.
See an authorized Mitsubishi Motors
dealer as soon as possible to replace or
repair the original tire.
Features and controls
N00530201540
5
5-119