Mitsubishi 2016 Outlander Manual page 214

Multi Information display - Type 1
Driving range display
Shows the approximate driving range (how
many more miles or kilometers you can
drive). When this driving range falls below
30 miles (50 km), "---" is displayed.
Refuel as soon as possible.
5
NOTE
 The driving range is determined based on the
fuel consumption data. This may vary
depending on the driving conditions and hab-
its. Treat the distance displayed as just a
rough guideline.
 When you refuel, the driving range display is
updated.
However, if you only add a small amount of
fuel, the correct value will not be displayed.
Fill to a full tank whenever possible.
 When your vehicle is stopped on an
extremely steep hill, the driving range value
may, change. This is due to the movement of
fuel in the tank and does not indicate any
breakdown.
 The display setting can be changed to the
preferred units (miles or km).
Refer to "Changing the function settings" on
page 5-140.
5-138 Features and controls
Average fuel consumption dis-
play
N00575201026
This displays the average fuel consumption
from the last reset to the present.
There are 2 types of mode settings of manual
reset and automatic reset.
Refer to "Changing the reset mode for aver-
age fuel consumption and average speed" on
page 5-141.
For information on how to change the aver-
age fuel consumption display setting, refer to
"Changing the function settings" on page
5-140.
NOTE
 The average fuel consumption display can be
reset separately in both auto reset mode and
manual reset mode.
 "---" is displayed when the average fuel con-
sumption cannot be measured.
 The initial (default) setting is "Auto reset
mode".
 Average fuel consumption may vary depend-
ing on the driving conditions (road condi-
tions, how you drive, etc.) The actual fuel
consumption may differ from the fuel con-
sumption displayed, so treat the fuel con-
sumption displayed as just a rough guideline.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
N00575301027
reset mode setting for the average fuel con-
sumption display.
 The display setting can be changed to the
preferred units {mpg (US), mpg (UK),
L/100km or km/L}.
Refer to "Changing the function settings" on
page 5-140.
Average speed display
This displays the average speed from the last
reset to the present.
There are 2 types of mode setting of manual
reset and automatic reset.
Refer to "Changing the reset mode for aver-
age fuel consumption and average speed" on
page 5-141.
For the method for changing the average
speed display setting, refer to "Changing the
function settings" on page 5-140.
NOTE
 The average speed display can be reset sepa-
rately in both auto reset mode and manual
reset mode.
 "---" is displayed when the average speed
cannot be measured.
 The initial (default) setting is "Auto reset
mode".
N00578500023