Multi Information Display - Type 2 - Mitsubishi 2016 Outlander Manual

Multi Information display - Type 1
NOTE
 You can adjust to 8 different levels for when
the front side-marker lights are illuminated
and when they are not.
 If the vehicle is equipped with the automatic
light control, the light switch is in a position
other than the "OFF" position and it is suffi-
5
ciently dark outside the vehicle, the meter
illumination switches automatically to the
adjusted brightness.
 The brightness level of the instruments is
stored when the ignition switch is turned to
the "OFF" or "LOCK" position or the opera-
tion mode is put in OFF.
 If you press and hold the button for longer
than about 2 second when the front side-
marker lights are illuminated, the brightness
level changes to the maximum level. Press-
ing and holding the button for longer than
about 2 second again returns the brightness
level to the previous level.
On vehicles equipped with Mitsubishi Multi-
Communication System, the map screen
color of Mitsubishi Multi-Communication
System may not be switched to nighttime
setting when the meter illumination bright-
ness level is at the maximum.
5-128 Features and controls
Multi Information display -
Type 1
The multi information display displays warn-
ings, the odometer, trip odometer, service
reminder, engine coolant temperature, fuel
remaining, outside temperature, selector lever
position, average and momentary fuel con-
sumption, driving range, average speed, etc.
It is also possible to change elements such as
the language and units used on the multi
information display.
[With ignition switch or operation mode in
OFF]
1-
Warning display screen  P.5-134
Information screen  P.5-130
2-
Interrupt display screen  P.5-133
I n f o r ma t i o n P r o v i d e d b y :
3- Door ajar warning display screen
 P.5-134
Odometer  P.5-135
4-
N00555001347