Table of Contents
Advertisement
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
If you choose to have your authorized
Mitsubishi Motors dealer register the ID
code, take your vehicle and all remaining
F.A.S.T.-keys to your authorized Mitsubishi
Motors dealer.
NOTE
5
You are provided with 2 F.A.S.T.-keys, but
you may register up to 4 F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys specially
cut for your vehicle from your Mitsubishi
Motors dealer.
Customer F.A.S.T.-key program-
ming (Except for vehicles sold in
Canada)
You can program new F.A.S.T.-keys to the
system if you have two valid (already regis-
tered) F.A.S.T.-keys and a blank (not regis-
tered) F.A.S.T.-key.
For F.A.S.T.-key programming, follow the
procedures below.
1. Open the driver's door.
NOTE
Keep the driver's door open until F.A.S.T.-
key programming is finished. Do not open or
close other doors.
5-28
Features and controls
2. While carrying the first valid F.A.S.T.-
key, put the operation mode in ON. (Per-
form the following procedure within 30
seconds.)
3. Insert the new F.A.S.T.-key into the key
slot in the illustrated direction.
4. With the first valid F.A.S.T.-key, press the
N00561201197
UNLOCK button for 4 to 10 seconds and
press the LOCK button during this time.
5. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 4. (Per-
form the following procedure within 30
seconds.)
6. With the second valid F.A.S.T.-key, press
the UNLOCK button for 4 to 10 seconds
and press the LOCK button during this
time.
I n f o r ma t i o n P r o v i d e d b y :
7. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 6. The
immobilizer display on the information
screen in the multi-information display
will blink.
When registration of ID code is complete,
the buzzer will sound 3 times and the
immobilizer display will come on for 30
seconds.
If an error occurs, F.A.S.T.-key program-
ming will be terminated and the buzzer
will sound for 3 seconds.
NOTE
F.A.S.T.-key programming will be termi-
nated if the operation mode is put in OFF
before the immobilizer display starts blink-
ing.
8. If you wish to register another F.A.S.T.-
key, repeat the process from step 1 after
the operation mode is put in OFF.
9. When all F.A.S.T.-keys are registered,
remove the F.A.S.T.-key from the key
slot.
Advertisement
Chapters
Table of Contents
