License Plate Lights - Mitsubishi 2016 Outlander Manual

2. Turn the socket (A) counterclockwise to
remove it, and then pull the bulb out of
the socket.
3. To install the bulb, perform the removal
steps in reverse.
NOTE
 When installing the light unit, first insert the
notch (B) into the hole on the body, and then
push on the light unit to fit it into place.

License plate lights

1. When removing the light unit (A), push it
toward the left side of the vehicle body.
2. Use a screw driver to gently pry up the tab
(B) and remove the lens.
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
I n f o r ma t i o n P r o v i d e d b y :
Replacement of light bulbs
3. Pull the bulb out of the socket.
N00944000360
4. To install the bulb, perform the removal
steps in reverse.
NOTE
 When mounting the light unit, insert tab (C)
first then align tab (D) with its hole.
Vehicle care and maintenance
9
9-37