Table of Contents
Advertisement
Automatic climate control air conditioner
NOTE
When the engine coolant temperature is low,
the air temperature from the heater will be
cool/cold until the engine warms up, even if
you have selected warm air with the switch.
To prevent the windshield and windows from
fogging up, the vent mode will be changed to
"
" and the blower speed will be reduced
while the system is operating in the AUTO
mode.
When you feel that it is hotter or colder than
7
the set temperature, you may adjust it to your
preference.
For further information, we recommend you
to consult an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
When the temperature is set to the highest or
the lowest setting, the air selection and the
air conditioner will be automatically changed
as follows.
Also, if the air selection is operated manually
after an automatic changeover, manual oper-
ation will be selected.
• Quick Heating (When the temperature is set
to the highest setting)
Outside air will be introduced and the air
conditioner will stop.
• Quick Cooling (When the temperature is set
to the lowest setting)
Inside air will be recirculated and the air
conditioner will operate.
The above indicates the factory settings. You
can personalize the air selection switch and
7-8
Comfort controls
air conditioning switch to match your per-
sonal preferences.
Contact your Mitsubishi Motors dealer or a
repair facility of your choice for assistance.
Refer to "Personalizing the air conditioning
switch (Changing the function setting)" on
page7-11.
Refer to "Personalizing the air selection
(Changing
the
function
setting)"
page7-10.
Synchronized mode and dual mode
(if so equipped)
The driver's side and the passenger's side
temperature can be controlled independently.
At this time, the "DUAL" indicator will be
shown in the display (A).
Synchronized mode
I n f o r ma t i o n P r o v i d e d b y :
If the driver's side temperature control
switch is pressed, the passenger's side
temperature will also be controlled to the
same setting temperature as the driver's
side.
Dual mode
If the passenger's side temperature con-
trol switch is pressed under synchronized
on
mode, the system will switch to dual
mode. In dual mode, the driver's side and
the passenger's side temperature can be
set separately by using each temperature
control switch.
Press the AUTO switch to return to syn-
chronized mode.
Advertisement
Chapters
Table of Contents
