Mitsubishi 2016 Outlander Manual page 84

Hide thumbs Also See for 2016 Outlander:
Table of Contents

Advertisement

Keyless entry system (if so equipped)
Within about 2 seconds, press the UNLOCK
button one more time to unlock all the doors
and liftgate.
The dome light will turn on for 30 seconds.
The turn signal lights will also blink twice.
The front side-marker and parking lights will
also turn on for about 30 seconds. Refer to
"Welcome light" on page 5-181.
5
NOTE
 On vehicles equipped with the mirror retrac-
tor switch, the outside rearview mirrors auto-
matically
extend
when
button(2) is pressed.
 On vehicles equipped with a Mitsubishi
Multi-Communication System, the functions
can be adjusted on the screen. For details,
refer to the separate operation manual.
 The door and liftgate unlock function can be
set so that all doors and liftgate unlock when
the UNLOCK button (2) is pressed once.
Refer to "Setting of door and liftgate unlock
function" on page 5-9.
5-8
Features and controls
Operation of the outside rear-
view mirrors (Vehicles
equipped with the mirror
retractor switch)
To retract
Within 30 seconds of locking the doors and
liftgate using the LOCK button, press the
LOCK button twice rapidly to retract the out-
the
UNLOCK
side rearview mirrors.
To extend
Within 30 seconds of unlocking the doors and
liftgate using the UNLOCK button, press the
UNLOCK button twice rapidly to return the
outside rearview mirrors to their extended
positions.
The outside rearview mirrors are not initially
set to work as described above. If you want
them to work as described above, you need to
set them so that they do not retract/extend
when
the
locked/unlocked using the keyless entry sys-
tem.
For details, please consult an authorized Mit-
subishi Motors dealer.
doors
and
liftgate
are
I n f o r ma t i o n P r o v i d e d b y :
In a vehicle equipped with the Mitsubishi
Multi-Communication System, it is possible
to change the setting by means of screen
operations.
Refer to the separate owner's manual for
details.
Answerback function
The horn and turn signal lights of the keyless
entry system answerback function can be
changed as required. This is done with the
key removed from the ignition switch.
NOTE
 The answerback function will not operate if
any of the doors are open.
Horn deactivation/reactivation
The answerback function can be set in the
following three ways.
Each time the answerback function is set, a
chime will sound to tell you the condition of
the answerback function.
One chime: The horn will not sound.
Two chimes: The horn will sound.

Advertisement

Table of Contents
loading

Table of Contents