Arm Rest - Mitsubishi 2016 Outlander Manual

WARNING
 To make sure that the seat is securely
locked, try to move it forward or back-
ward without using the adjusting lever.
CAUTION
 When sliding (vehicles with second row seat
slide function) or reclining the seat rearward,
pay careful attention to the third row seat
passengers.
To adjust the seatbacks
Pull the lever up and adjust the seatback by
hand to the desired position, and release the
lever. The seatback will lock in place.
NOTE
 You can adjust the seatback forward or back-
ward on either side separately.
WARNING
 To reduce the risk of serious injury or
death in the event of an accident or sud-
den stop, all seatbacks should be kept in
the upright position while the vehicle is in
motion.
 Seat belt performance during an accident
can be adversely affected if the seatbacks
are reclined. The more a seatback is
reclined, the more likely seat belt perfor-
mance will be adversely affected. If the
seat belt is not properly positioned against
the body during an accident, there is
increased risk you will slide under the belt
and receive serious injury or death.
 When a person is sitting in the middle
seating position of the second row seats,
the two sides of the second seats must have
the same forward/backward
(vehicles with second row seat slide func-
tion) and the same seatback angle.
I n f o r ma t i o n P r o v i d e d b y :

Arm rest

To use the armrest, tilt the arm rest down for
use as shown.
The arm rest includes a cup holder.
NOTE
 Never sit on an arm rest.
Doing so could damage the arm rest.
position
Accessing the third row seat
(Walk-in function, Seating 7
passengers)
For third row seat passenger entry or exit, the
second row seats can be moved forward.
Pull up the lever (A) and tilt the seatback for-
ward. Then slide the entire seat forward.
Seat and restraint systems
Second row seats
N00403001318
4
N00400101031
4-9