Mitsubishi 2016 Outlander Manual page 270

Bluetooth® 2.0 interface (if so equipped)
Volume down button
Press this button to decrease the volume.
SPEECH button
 Press this button to change to voice recog-
5
nition mode.
While the system is in voice recognition
mode, "Listening" will appear on the
audio display.
NOTE
 On vehicles equipped with the Mitsubishi
Multi-Communication System, pressing the
SPEECH button will activate the voice rec-
ognition mode (a beep will sound when suc-
cessfully activated). To use the voice
recognition of the Bluetooth
press the PICK-UP button.
 If you press the button briefly while in
voice recognition mode, it will interrupt
prompting and allow voice command
input.
Pressing the button longer will deactivate
the voice recognition mode.
 Pressing this button briefly during a call
will enable voice recognition and allow
voice command input.
5-194 Features and controls
PICK-UP button
 Press this button when an incoming call is
received to answer the telephone.
NOTE
 When not receiving incoming calls, pressing
the PICK-UP button on vehicles equipped
with the Mitsubishi Multi-Communication
System, will activate the voice recognition of
the Bluetooth
 When another call is received during a
call, press this button to put the first caller
on hold and talk to the new caller.
• In such circumstances, you can press the
button briefly to switch between callers.
You will switch to the first caller and the
other caller will be put on hold.
®
2.0 interface,
• To establish a three-way call in such situ-
ations, press the SPEECH button to enter
voice recognition mode and then say
"Join calls."
HANG-UP button
 Press this button when an incoming call is
received to refuse the call.
 Press this button during a call to end the
current call.
When another call is on hold, you will
switch to that call.
®
2.0 interface.
I n f o r ma t i o n P r o v i d e d b y :
 If this button is pressed in the voice recog-
nition mode, the voice recognition mode
will be deactivated.
NOTE
 When you press the SPEECH button (except
for vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Communica-
tion System) to enter voice recognition mode
with a cellular phone paired to the system,
current information on the cellular phone,
such as "remaining battery life," "signal
strength" or "roaming," will be displayed on
the audio display.*
*: Some cellular phones will not send this
®
information to the Bluetooth
 Call waiting and three-way calls can be used
®
by the Bluetooth 2.0 interface, only if it is
possible to use those services with your cel-
lular phone.
Microphone
Your voice will be recognized by a micro-
phone in the overhead console, allowing you
to make hands-free calls with voice com-
mands.
2.0 interface.