Free-Hand Advanced Security Transmitter (F.a.s.t.-Key) (If So Equipped) - Mitsubishi 2016 Outlander Manual

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)

Procedure for replacing the
remote control transmitter bat-
tery
1. Before replacing the battery, remove static
electricity from your body by touching a
5 metal grounded object.
2. With the Mitsubishi mark facing you,
insert the cloth-cov-ered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
NOTE
 Be sure to perform the procedure with the
Mitsubishi mark facing you. If the Mitsubi-
shi mark is not facing you when you open the
remote control transmitter case, the buttons
may come out.
5-12 Features and controls
3. Remove the remote control transmitter
from the remote control transmitter case.
Then, open the remote control transmitter
using the method described in step 1.
N00544100064
4. Remove the old battery.
5. Install a new battery with the +side (A)
down.
6. Close the remote control transmitter
firmly.
I n f o r ma t i o n P r o v i d e d b y :
7. Place the remote control transmitter in the
remote control transmitter case, then
securely close the remote control trans-
mitter case.
8. Check the keyless entry system to see that
it works.
NOTE
 You may purchase a replacement battery at
an electric appliance store.
 An authorized Mitsubishi Motors dealer can
replace the battery for you if you prefer.
CAUTION
 When the remote control transmitter case is
opened, be careful to keep water, dust, etc.
out. Also, do not touch the internal compo-
nents.
+ side
Free-hand Advanced Secu-
rity Transmitter (F.A.S.T.-
- side key)
Coin type bat-
The Free-hand Advanced Security Transmit-
tery CR1620
ter (F.A.S.T.-key) enables the doors and the
liftgate to be locked and unlocked, the engine
to be started and the operation mode to be
changed simply by carrying it.
(if so equipped)
N00503101121