Mitsubishi 2016 Outlander Manual page 358

Listen to Satellite Radio (if so equipped)
Scan Station Selection
Channels are received in order and take 10
seconds each.
Scan All Channels
Press the SCAN key.
All of the channels are scanned.
7
NOTE
 Press this key again while receiving the
channel to return to normal reception.
 Selecting a channel will cancel this.
Scan Category Channels
1. Press the CAT key.
Switches to the category search mode,
and the category name is indicated on the
display.
2. Turn the /SEL key to select the cate-
gory.
3. Press the SCAN key.
The channels in the selected category are
scanned.
7-30 Comfort controls
NOTE
 Press the SCAN key or CAT key again while
receiving the channel to return to normal
reception.
 Turning the /SET key will cancel.
Preset Memory
Register the channel in advance, and select
this at a later time.
1. Tune in to the channel to register.
2. Hold down any of the keys from the 1RPT
key to the 6 key.
A "Beep" sounds, and the preset key is
registered.
NOTE
 The preset memory can register a maximum
of 6 stations per band.
 If a preset key that already has a channel reg-
istered is selected, then this is overwritten
with the new preset.
 Pressing the preset key will select the previ-
ously registered channel.
The preset channels on the display are shown
as "P1" though "P6".
I n f o r ma t i o n P r o v i d e d b y :
Channel Search
Other channels can be selected while listen-
ing to a channel.
1. Press the CAT key.
Switches to the category search mode,
and the category name is indicated on the
display.
2. Turn the /SEL key to select the cate-
gory.
3. Press the /SEL key.
Switches to channel search mode.
4. Turn the /SEL key to select the chan-
nel.
5. Press the /SEL key.
A "Beep" sounds, and the selected chan-
nel is received. (Channel preliminary set-
ting mode)
The channel name shown on the display
flashes.
Press the /SEL key again to cancel the
search mode and return to normal recep-
tion.
6. To continue the search, turn the
key to select the channel.
The selected channel is received.
7. Press the /SEL key.
Cancels the search mode and returns to
normal reception.
/SEL