Step 3 Registering Smart Card Information - Fuji Xerox ApeosPort-IV C5575 Administration Manual

3
Select [Tools] on the [Services Home] screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [User Details Setup].
7
Select [Smart Card Logout Timing], and then select [Change Settings].
8
Select the authentication logout method, and then select [Save].
9
Select [Close].

Step 3 Registering Smart Card Information

The system administrator can register smart cards using CentreWare Internet Services.
Note
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
1
Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.312).
2
Click the [Properties] tab.
3
Click [ ] on the left of [Securities], and then click [Smart Card Settings].
4
Select the smart card to use.
1) Click [Edit] next to the smart card.
2) Select the [Enabled] check box, and then set the priority.
3) Click [Apply].
Note
5
Register the smart card that you selected the [Enabled] check box for.
1) Click [Edit] next to the smart card.
2) Configure required settings.
3) Click [Apply].
6
To encrypt the smart card information, click the [Encrypt] button in [Encryption Settings].
Important • Once you encrypt the smart card information, you cannot view or edit the information later. Also,
You can backup the smart card setting using [Cloning]. For more information, refer to the help of CentreWare Internet
Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
• The information used for authentication can also be set from CentreWare Internet Services. For
more information, refer to the help of CentreWare Internet Services.
connect to the internet. The communication fee shall be borne by you.
• You can select multiple smart cards, but the card detection time increases in proportion to the
number of cards selected. We recommend that you select the required cards only.
when you click the [Decrypt] button, the information is reset to the default. You should backup the
smart card information before encryption.
connect to the internet. The communication fee shall be borne by you.
Configuration for IC Card Reader (Optional)
14
433