Fuji Xerox ApeosPort-IV C5575 Administration Manual page 88

3 Maintenance
1
Make sure that the machine is not operating,
and open the front cover.
2
Rotate the release lever of the drum cartridge
cover counterclockwise.
3
3
Lower the cover.
Note
4
Slowly slide out the cleaning bars housed
within the LED printhead until it stops. The
cleaning bars are located in the cleaning
connection just under the drum cartridges (R1,
R2, R3, or R4).
Note
Important • Do not remove the cleaning bars from the
5
Slowly slide the cleaning bars back into place.
Note
88
• You can now see the drum cartridge.
• Slide out the cleaning bars until you see
" ".
housing.
• Clean the four LED printheads (R1 to R4) by
sliding the cleaning bars back and fourth for
two or three times, respectively.