Default Language - Fuji Xerox ApeosPort-IV C5575 Administration Manual

5 Tools
Note
For more information, refer to "Assigning Services to the Custom Buttons" (P.33).
One-touch Buttons
Set the number of address numbers that are assigned to the one touch buttons.
Type 1
Assigns the one touch buttons 1 to 70 to the address numbers 0001 to 0070, and buttons
M01 and M02 to the stored programming jobs 1 and 2.
Type 2
Assigns the one touch buttons 1 to 60 to the address numbers 0001 to 0060, and buttons
61 to 72, and M01 and M02 to the stored programming jobs 1 and 12.
Note
Services Home
Set the layout of service buttons that appear on the [Services Home] screen.
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.29).
Services Home - Additional Features
Set the layout of additional feature buttons that appear on the [Services Home] screen.
5
Note
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.29).
Job Type on Job Status screen
Select the job types to be shown on the [Completed Jobs] screen under the [Job Status]
screen that is displayed when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [Printer & Print from Folder Jobs], [Scan, Fax, & Internet Fax Jobs], or
[Job Flow & File Transfer Jobs].

Default Language

You can select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode and
set by local users.
Setting in the System Administration mode
The language set here is the standard language that is retained even when the machine
is powered off and on.
Setting by local users
The language setting in [Language] in the [Services Home] screen is lost when the
machine is powered off.
Important • When [English] is selected, only ASCII characters can be used.
150
• Copy service is assigned to [Custom Button 1] and Review is assigned to [Custom Button 3] by
factory default.
• [Type 1] is selected by factory default.
• If you do not want to display [Setup] as an additional feature button, select [Show this in Admin
mode] check box. You can set or change settings with the machine only when it is in the System
Administration mode.
• When you set [Language] to [English] on the [Services Home] screen and an address book entry or
contents of [Details] of Job Flow Sheets is entered in double-byte characters, the characters may not
be displayed properly.
• When you use CentreWare Internet Services to import a CSV file* including double-byte characters
other than a selected language, the characters in the file may be garbled or the import may fail.
* : CSV (Comma Separated Values) is a file format that is often used for saving data by
database programs.
spreadsheets and