Fuji Xerox ApeosPort-IV C5575 Administration Manual page 325

Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
Note • The spool destination can be configured when the LPD port is enabled.
Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])
Port Settings
IP Mode
Host Name
IPv4
- IP Address Resolution
- Port Settings
- IP Address
- Subnet Mask
- Gateway Address
IPv6
- Enable Manual Address
- IP Address
- Link-Local Address
- Gateway Address
Domain Name
DNS Configuration
- IPv4
- IPv6
DHCP/DDNS
WINS Server
Port Number
TBCP Filter
Note • The TBCP filter can be configured when the Adobe PostScript 3 Kit (optional) is installed.
Connection Time-Out
Maximum Number of Sessions
Note • The Maximum Number of Sessions can be configured when the LPD port is enabled.
TCP-MSS Mode
IPv4 Subnet Mask when TCP-MSS Mode is enabled
IP Filtering
- IPv4 Filtering
- IPv6 Filtering
Installation When Using TCP/IP (LPD/Port 9100)
7
325