Fuji Xerox ApeosPort-IV C5575 Administration Manual page 495

Error Code
016-372
[Cause] An error occurred.
016-373
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
016-374
on the machine power. If the same message is displayed again, contact our Customer
016-375 Support Center.
016-376
016-377
016-378
016-379
016-380
016-381
016-382
016-400 [Cause] The user name or password for 802.1x authentication does not match.
[Remedy] Confirm and correctly enter the user name or password. If the error still is not resolved,
check whether the network environment is set correctly.
016-401 [Cause] The 802.1x authentication method cannot be processed.
[Remedy] Set the authentication method of the machine to the same method as set for the
authentication server.
016-402 [Cause] The authentication connection timed out.
[Remedy] Confirm the network connection and switch setting of the authentication device
physically connected to the machine via a network, and check whether it is connected
to the machine correctly.
016-403 [Cause] The root certificate did not match.
[Remedy] Confirm the authentication server and store the root certificate of the server certificate
of the authentication server into the machine.
If you cannot acquire the root certificate of the server certificate, set [Server Certificate
Verification] of [IEEE 802.1x Settings] to [Disabled] on the touch screen.
016-404 [Cause] An internal error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
016-405
[Cause] An error occurred in the certificate stored in the machine.
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All Certificates/Initialize Settings" (P.161).
016-406 [Cause] An error occurred in the SSL client certificate.
[Remedy] Take one of the following measures:
1)Store an SSL client certificate in the machine, and set it as the SSL client certificate.
2)If an SSL client certificate cannot be set on the machine, select an option other than
016-407 [Cause] After automatically obtained the IP address, the machine failed to retrieve proxy server
settings from the DHCP server.
016-408
016-409
[Remedy] Modify the customized program and install it again.
016-410
016-411
016-412
016-450 [Cause] The SMB host name already exists.
[Remedy] Change the host name.
Refer to "Host Name" (P.205).
Cause and Remedy
[EAP-TLS] in [Authentication Method].
Error Code
15
495