Reduce/Enlarge Presets; Custom Colors; Annotations - Create Comments - Fuji Xerox ApeosPort-IV C5575 Administration Manual

Inch Size
You can select from inch series sizes.
Others
You can select from other sizes.
Custom Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.

Reduce/Enlarge Presets

Set the magnifications displayed as [Preset %] which are displayed when [Proportional %]
is selected under [Reduce/Enlarge] in the [Copy] screen.
You can assign any magnification to the Reduce/Enlarge Preset buttons other than [100%]
and [Auto %].

Custom Colors

Set the custom colors used for [Single Color] and [Dual Color] in the [Output Color] screen.
You can assign custom colors with yellow (0 to 100%), magenta (0 to 100%), and cyan (0
to 100%) to each custom color buttons 1 to 6.
Note

Annotations - Create Comments

Register text to print with [Comment] under [Annotations]. You can enter up to 64 single-
byte characters.
For information about how to enter characters, "Entering Text" (P.36).
• Adjust so that the total of yellow, magenta, and cyan does not exceed 240%.
Copy Service Settings
195
5