Fuji Xerox ApeosPort-IV C5575 Administration Manual page 561

Error Code
116-386
[Cause] The fax cable is not connected correctly.
[Remedy] Connect the cable securely, and then switch off the machine power, make sure that the
touch screen is blank, and then switch on the machine power. If the error still is not
resolved, contact our Customer Support Center.
116-387
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
116-388 [Cause] The optional hard disk is not installed.
[Remedy] Install the hard disk. Contact our Customer Support Center.
116-389 [Cause] The Extension System Memory (optional) is not installed.
[Remedy] Install the Extension System Memory (optional). Contact our Customer Support Center.
116-390 [Cause] An error occurred in the machine.
[Remedy] Follow the message displayed on the touch screen and initialize the memory of the
machine.
116-391 [Cause] An error occurred in the machine.
116-392
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-393
on the machine power. If the same message is displayed again, contact our Customer
116-394 Support Center.
116-395
116-396
116-397
116-399
116-700 [Cause] Memory is insufficient for Image Extension Kit.
[Remedy] Select Standard for the image quality.
116-701 [Cause] Unable to use the 2 Sided Printing feature because of insufficient memory.
[Remedy] Increase memory, or install the hard disk if it is not installed.
116-702 [Cause] A print job was processed using a substitute font.
[Remedy] Check the print data.
116-703 [Cause] Probable causes are as follows:
1)An error occurred during Post Script (optional) processing.
2)An error occurred because of insufficient memory.
3)An error occurred because of insufficient memory for PostScript processing.
[Remedy] For 1), check the print data.
For 2), increase memory.
For 3), increase the value for [PostScript Memory].
116-704 [Cause] An error occurred when reading data on the media.
[Remedy] Check whether the media is inserted correctly.
116-705 [Cause] An error occurred when reading data on the media.
116-706
[Remedy] Use a computer to confirm the content recorded on the media.
116-707
116-708
116-709
Cause and Remedy
Error Code
15
561