Interface Cables; Using The Usb Interface - Fuji Xerox ApeosPort-IV C5575 Administration Manual

Interface Cables

When you connect he machine directly to your computer, use the USB interface. When you
connect the machine to a network, use the Ethernet interface.

Using the USB Interface

The USB interface of the machine supports USB 2.0.
This section describes the installation procedures for the USB interface.
1
Press the power switch to the [
2
Make sure that the touch screen is blank and the <Energy Saver> button does not light up.
3
Open the front cover.
4
Press the main power switch to the [
5
Remove the rear right cover.
6
Connect the USB cable to the USB 2.0 interface
connector.
7
Return the rear right cover to its original
position.
8
Connect the other end of the USB cable to the computer.
9
Press the main power switch to the [ | ] position to switch on the main power.
10
Close the front cover.
11
Press the power switch to the [ | ] position to switch on the power.
12
Restart the computer.
] position to switch off the power.
] position to switch off the main power.

Interface Cables

1
21