Step2 Configuration On The Computer - Fuji Xerox ApeosPort-IV C5575 Administration Manual

1) Click the [Properties] tab.
2) Click [
3) Click [Machine Digital Certificate Management].
4) Click the [Create New Self Signed Certificate] button.
5) Set [Digital Signature Algorithm] as necessary.
6) Set [Public Key Size] as necessary.
7) Set [Issuer] as necessary.
8) Set [Days of Validity] as necessary.
9) Click [Apply].
10) Refresh the web browser.
3
Set up the SSL/TLS information.
1) Click [
2) Click [SSL/TLS Settings].
3) Select the [Enabled] check box for [HTTP - SSL/TLS Communication].
4) Set up [HTTP - SSL/TLS Communication Port Number].
Note
5) Click [Apply].
6) When the right frame of the web browser changes to the machine reboot display, click
[Reboot Machine]. The machine reboots and the settings are enabled.

Step2 Configuration on the Computer

To encrypt communications between a web browser and the machine, enter an address
beginning with "https" instead of "http" in the address box of the web browser.
Example of IP address entry:
https://192.168.1.1/ (IPv4)
https://[2001:DB8::1234]/ (IPv6)
Example of Internet address entry:
https://myhost.example.com/
When encrypting IPP communications (Internet printing) and adding a printer from [Add
Printer], enter an address beginning with "https" instead of "http" as the URL of the printer.
For information on the settings, refer to the manual contained in the Driver CD Kit.
] on the left of [Security] to display the items in the folder.
] on the left of [Security] to display the items in the folder.
• Do not use the numbers of any other ports.
Configuration of HTTP Communications Encryption
13
389