Step 4 Configuring The Sip Server - Fuji Xerox ApeosPort-IV C5575 Administration Manual

10 Using IP Fax (SIP)
2
Set items displayed on the [Fax/Internet Fax] screen.
1) Select [Fax Service Settings].
2) Select [Screen Defaults].
3) Configure the required settings, and then select [Save].
For information on the screen default, refer to "Screen Defaults" (P.238).
3
Set the default settings of the Fax feature.
1) Select [Fax Defaults].
2) Configure the required settings, and then select [Save].
For information on the fax default, refer to "Fax Defaults" (P.239).
4
Configure the settings related to fax control.
1) Select [Fax Control].
2) Configure the required settings, and then select [Save].
For information on the fax control, refer to "Fax Control" (P.240).
5
Configure the local terminal information.
1) Select [Local Terminal Information].
2) Configure the required settings, and then select [Save].
For information on the local terminal information, refer to "Local Terminal Information" (P.246).
6
Select [Close] repeatedly until the [Tools] screen is displayed.
7
Select [Close].
Note
8
Print a configuration report to confirm that the fax settings.
For information on how to print a configuration report, refer to "Print Reports" (P.106).

Step 4 Configuring the SIP Server

10 This section describes the configuration procedures to set the IP address, login user name,
and password of a SIP server to go through.
Configure a SIP server when you use the IP fax (SIP) feature via a SIP server.
You can configure the settings using CentreWare Internet Services. For information on how to use CentreWare Internet
Services, refer to "Configuring Machine Settings Using CentreWare Internet Services" (P.313).
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
Note
3) Select [Tools] on the [Services Home] screen.
2
Configure SIP server settings.
For more information on SIP server settings, refer to "SIP Settings" (P.207).
370
• Rebooting the machine may be required depending on the settings. When a message displayed on
the screen, follow the message and reboot the machine.
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
• The default user ID is "11111".
• The default passcode is "x-admin".