Toshiba e-STUDIO230L Service Handbook page 570

(5) When the SSL is enabled, perform the setting of the following items again with "Create self-certif-
icate" of TopAccess. (e-STUDIO202L/203L/232/233/282/283)
Country Name
State or Province Name
Locality Name
Organization Name
Organizational Unit Name
Common Name
Email Address
(6) When wireless LAN is used, perform the setting again on the LCD panel. (only when security
with a certificate is used)
Also, upload the following certificate file with "Install Certificate for Wireless LAN" of TopAccess.
(e-STUDIO202L/203L/232/233/282/283)
CA certificate
User certificate
[G] Referring to the "FUNCTION LIST FOR MAINTENANCE" list which was printed beforehand,
perform the re-setting.
(1) Print out the "FUNCTION LIST FOR MAINTENANCE" list after the formatting. (Refer to the pro-
cedure of (2).)
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting.
(4) Turn the power OFF.
[H] Referring to the "FUNCTION" list which was printed beforehand, perform the re-setting of
the default setting of the FAX function.
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
TROUBLESHOOTING
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
5 - 118
07/11