Toshiba e-STUDIO230L Service Handbook page 747

(21) Select the item to be restored with the digital keys.
The mark "*" is shown on the selected item. The mark "*" can be deleted or added each time the
corresponding digital key is pressed.
• To restore the data individually, select the following item.
<Restoring SRAM Data>
Select "1. SRAM".
Note: Note:
The backup/restore of the SRAM data can be performed only for the same model.
The ROM version must be the same when the data are backed up and restored.
(The following screens are given as an example of when SRAM data are restored.)
(22) Press the [Start] button.
The restore starts and the restoring status is displayed on the LCD screen.
(23) "Restore Completed" is displayed on the LCD screen when the restore has been properly com-
pleted.
(24) Turn the power OFF and remove the USB storage device.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-33
Fig. 9-34
e-STUDIO200L/202L/203L/230/232/233/280/282/283
DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/203L/232/233/282/283)
9 - 21
05/11
9