Toshiba e-STUDIO230L Service Handbook page 38

Error code Classification
E160 Paper misfeeding
E190
E200 Paper transport jam
E210
E220
E270
E280
E300
E310
E320
E330
E340
E350
E360
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Contents
PFP lower drawer misfeeding (Paper not reaching
the PFP lower drawer feed sensor): The paper fed
from the PFP lower drawer does not reach the PFP
lower drawer feed sensor.
LCF misfeeding (Paper not reaching the LCF feed
sensor): The paper fed from the LCF does not
reach the LCF feed sensor.
Upper drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st trans-
port sensor.
Lower drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st trans-
port sensor.
Lower drawer transport jam (Paper not reaching the
1st transport sensor): The paper does not reach the
1st transport sensor after it has passed the lower
drawer feed sensor.
Bypass transport jam (paper not reaching the regis-
tration sensor): The paper does not reach the regis-
tration sensor after it has passed the 1st transport
sensor.
ADU transport jam (paper not reaching the registra-
tion sensor): The paper which has passed through
ADU and the 1st transport sensor does not reach
the registration sensor during duplex printing.
PFP upper drawer transport jam (Paper not reach-
ing the registration sensor): The paper does not
reach the registration sensor after it has passed the
1st transport sensor.
PFP upper drawer transport jam (Paper not reach-
ing the 1st transport sensor): The paper does not
reach the 1st transport sensor after it has passed
the 2nd transport sensor.
PFP upper drawer transport jam (Paper not reach-
ing the 2nd transport sensor): The paper does not
reach the 2nd transport sensor after it has passed
the PFP upper drawer feed sensor.
PFP lower drawer transport jam (Paper not reach-
ing the registration sensor): The paper does not
reach the registration sensor after it has passed the
1st transport sensor.
PFP lower drawer transport jam (Paper not reach-
ing the 1st transport sensor): The paper does not
reach the 1st transport sensor after it has passed
the PFP lower drawer feed sensor.
PFP lower drawer transport jam (Paper not reach-
ing the 2nd transport sensor): The paper does not
reach the 2nd transport sensor after it has passed
the PFP upper drawer feed sensor.
PFP lower drawer transport jam (Paper not reach-
ing the PFP upper drawer feed sensor): The paper
does not reach the PFP upper drawer feed sensor
after it has passed the PFP lower drawer feed sen-
sor.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
2 - 2
Troubleshooting
P. 5-20
P. 5-21
P. 5-3
P. 5-3
P. 5-4
P. 5-5
P. 5-5
P. 5-3
P. 5-4
P. 5-6
P. 5-3
P. 5-4
P. 5-6
P. 5-7