Toshiba e-STUDIO230L Service Handbook page 104

Adjustment mode (05) <e-STUDIO202L/203L/232/233/282/283>
Classi-
Code
fication
306 Scanner Image location adjustment
of primary scanning direc-
tion
(scanner section)
308 Scanner Distortion mode
340 Scanner Reproduction ratio adjust-
ment of secondary scan-
ning direction
(scanner section)
350 Scanner Shading posi-
tion adjust-
ment
351
354 RADF Adjustment of
RADF paper
alignment
355
357 RADF Fine adjustment of RADF
transport speed
358 RADF RADF sideways deviation
adjustment
359 Scanner Carriage position adjust-
ment during scanning from
RADF
365 RADF RADF lead-
ing edge posi-
tion
adjustment
366
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Func-
Items
tion
ALL
ALL
ALL
Original ALL
glass
RADF ALL
for single - ALL
sided orig-
inal
for double ALL
sided orig-
inal
ALL
ALL
ALL
for single - ALL
sided orig-
inal
for double ALL
sided orig-
inal
2 - 68
07/11
Default
<Accept-
RAM
able
value>
156 SYS When the value
<0-255> increases by "1", the
image shifts by approx.
0.0846 mm toward the
front side of the paper.
- - Moves carriages to the
adjusting position.
(Chap. 3.2.4)
129 SYS When the value
<0-255> increases by "1", the
reproduction ratio in the
secondary scanning
direction (vertical to
paper feeding direction)
increases by approx.
0.223%.
128 SYS 0.1369 mm/step
<118-
138>
128 SYS
<118-
138>
10 SYS When the value
<0-20> increases by "1", the
aligning amount
increases by approx.
10 SYS
0.5 mm.
<0-20>
50 SYS When the value
<0-100> increases by "1", the
reproduction ratio of the
secondary scanning
direction when using the
RADF increases by
approx. 0.1%.
128 SYS When the value
<0-255> increases by "1", the
image of original fed
from the RADF shifts
toward the rear side of
paper by approx.
0.0846 mm.
128 SYS When the value
<0-255> increases by "1", the car-
riage position when
using the RADF shifts by
approx. 0.1 mm toward
the original feeding side.
50 SYS When the value
<0-100> increases by "1", the
copied image of original
fed from the RADF shifts
50 SYS
toward the trailing edge
<0-100>
of paper by approx.
0.1 mm.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
1
6
1
1
1
1
1
1
1
1
1
1