Toshiba e-STUDIO230L Service Handbook page 645

(15) "Update Completed!!" is displayed at the bottom of the LCD screen after the updating is com-
pleted properly.
"Update Failed!!" is displayed at the bottom of the LCD screen when the updating is not com-
pleted properly. Turn OFF the power, and then check the following items. After confirming and
clearing the problems, restart updating from the beginning.
• Are the equipment and PC properly connected?
• Is the selected data file proper?
• Do the cable, equipment and PC operate properly?
• Are FSMS and printer driver properly installed?
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-79
Fig. 6-80
e-STUDIO200L/202L/203L/230/232/233/280/282/283
6 - 69
04/09
FIRMWARE UPDATING
6