Toshiba e-STUDIO230L Service Handbook page 514

[CB20] Delivery motor abnormality
MJ-1022
Rotate the delivery roller by hand. Does it rotate smoothly?
NO
YES
Is the wiring between the finisher controller PC board and delivery motor (M1) correct?
NO
YES
Is the delivery motor clock sensor (S1) working properly?
NO
YES
1) Replace the delivery motor (M1).
2) Replace the finisher controller PC board.
MJ-1025
Is the delivery belt home position sensor (PI7) working properly?
NO
YES
Is the wiring between the finisher controller PC board and delivery motor (M3) correct?
NO
YES
Rotate the stack delivery roller by hand. Does it rotate smoothly?
NO
YES
Try replacing the delivery motor (M3). Is the problem corrected?
YES
NO
Replace the finisher controller PC board.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
TROUBLESHOOTING
Fix the mechanism.
Correct the wiring.
Replace the sensor.
Replace the sensor.
Correct the wiring.
Fix the mechanism.
END.
5 - 62
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved