<Updating FAX ROM>
Important:
•
Before updating the FAX ROM, make sure to print out the current Function list for mainte-
nance, Function list (ADMIN), Phone book number information and Group number informa-
tion. In case the updating is failed and the registered information of the users is lost for some
reason, re-register the user information referring to the lists and recover it.
•
Confirm the following items before turning OFF the power of the equipment. Turning OFF the
power may clear the data below.
-
Confirm that the "MEMORY RX" LED is OFF and there are no memory reception data.
-
Print the "Mailbox/Relay box report" and then confirm that there are no F code data.
-
Press the [JOB STATUS] button to display the screen and then confirm that there are no
memory transmission data.
(1)
Install the ROM to the download jig.
Make sure the direction is correct (P.6-33 "Fig. 6-35").
(2)
Turn OFF the power of the equipment.
(3)
Remove the cover plate.
(4)
Connect the download jig with the jig connector (CN602) on the FAX board.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
FIRMWARE UPDATING
Cover plate
Fig. 6-63
Connector
Fig. 6-64
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
6 - 58
05/11