Toshiba e-STUDIO230L Service Handbook page 650

(3) Connect the USB storage device to the USB connector (host) on the SYS board.
Notes:
• Do not connect multiple USB storage devices together.
• The USB storage device can be connected to either of 2 USB connectors (host).
• In case the printer kit (GM-1020 or 1030), printer/scanner kit (GM-2020 or 2030) and scanner
upgrade kit (GM-3020 or 3030) are used, the update must be performed after all the "don-
gles" are disconnected from the USB connector (host) and only the USB storage device is
connected.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
FIRMWARE UPDATING
USB storage device
Fig. 6-82
6 - 74
USB connector ( host )
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved