Toshiba e-STUDIO230L Service Handbook page 432

[Preventive Maintenance Checklist]
Notes:
• Perform cleaning and lubricating in the following timing. Lubricate the replacement parts
according to the replacement cycle.
e-STUDIO200L/202L/203L: every 64,000 sheets
e-STUDIO230/232/233:
e-STUDIO280/282/283:
• Values under "Replacement" indicate the replacement cycle for the e-STUDIO200L/
e-STUDIO230/e-STUDIO280 or e-STUDIO202L(203L)/e-STUDIO232(233)/
e-STUDIO282(283).
• The replacement cycle of the parts in the feeding section equals to the number of sheets fed
from each paper source.
• Be careful not to put oil on the rollers, belts and belt pulleys when lubricating.
A. Scanner
Items to check
A1 Original glass
A2 ADF original glass
A3 Mirror-1
A4 Mirror-2
A5 Mirror-3
A6 Reflector
A7 Lens
A8 Exposure lamp
A9 Automatic original
detection sensor
A10 Slide sheet
(front and rear)
B. Laser unit
Items to check
B1 Slit glass
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PREVENTIVE MAINTENANCE (PM)
every 74,000 sheets
every 90,000 sheets
Cleaning Lubrication
or A
or A
Cleaning Lubrication
4 - 10
07/11
Replacement Operation
(x 1,000 sheets) check
∆
∆
Replacement Operation
(x 1,000 sheets) check
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Parts list
Remarks
<P-I>
<P22-I1> *a1
<P22-I2> *a1
<P23-I4>
<P11-I16>
<P23-I6>
<P11-I17>
Parts list
Remarks
<P-I>