Toshiba e-STUDIO230L Service Handbook page 569

[B] Print out the "FUNCTION LIST FOR MAINTENANCE" (content of Function Mode (13) set-
ting) list.
(1) Press the [USER FUNCTIONS] button and then the [USER] button.
(2) Press the [LIST] button.
(3) Key in [*] [#] [*] [*] [3] [3] and then press the [START] button.
[C] Print out the "FUNCTION" list.
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [LIST/REPORT] button and then the [LIST] button.
(4) Press the [FUNCTION] button.
[D] Replace the HDD.
[E] Update of HDD program data and UI data.
(1) Create partitions. (In case of using the download jig, this is not necessary.)
While pressing [3] and [CLEAR] button, turn the power ON.
When "Firmware Version Up Mode" appears on the LCD, key in [3] and press the [START] but-
ton.
(2) Format the HDD. (Setting Mode (08-690: 2))
(3) Update with the download jig or USB storage.
See P. 6-1 "6. FIRMWARE UPDATING" for details.
(4) Format the HDD. (Setting Mode (08-690: 2))
* When the FAX unit (GD-1150) is installed.
Start up with the FAX Clearing Mode (1*)
Perform the 1*-100 (FAX Set Up), 1*-102 (Clearing the image data) of the FAX Clearing
Mode.
[F] Ask users to reset the user's setting items and to restore the data/information. See the fol-
lowing for the reset and the restore.
(1) Printer driver
Upload them in the "Administrator" menu of TopAccess.
(2) F-code information, Template registering information, Address book
Restore them in the "Administrator" menu of TopAccess
(3) Department management data
Import them in the "Administrator" menu of TopAccess.
(4) Image data in the Electronic Filing
Upload them in the "e-Filing" of TopAccess.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
The list is outputted.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
5 - 117
05/05
The list is outputted.
TROUBLESHOOTING
5