Toshiba e-STUDIO230L Service Handbook page 389

(3) Loosen the hinge screws at the front side.
(4) Position the pins with the holes on the RADF
by moving it so that the pins fit into the holes
when the RADF is closed.
(5) Tighten the left-hand hinge screw at the rear
side.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-84
Fig. 3-85
Fig. 3-86
e-STUDIO200L/202L/203L/230/232/233/280/282/283
3 - 71
05/11
3
ADJUSTMENT