Toshiba e-STUDIO230L Service Handbook page 669

If the updating data file does not exist or a data file for other model is stored, the following mes-
sage is displayed. In this case, turn OFF the power of the equipment and confirm if the data file
stored in the USB storage device is correct. Then repeat the procedure from (4).
Note: Note:
"If you still want to continue, Please Push Start Key" will not be displayed if the FROM basic sec-
tion software version of the equipment is "V1.00 / 4.22" or later.
If an attempt to update the FROM basic section software "V1.00 / 1.12" or earlier version to the
latest firmware version without the update program, the following screen appears. In this case,
store "mentusb.o" and "dlFirmWare_202_282", which are the files for update program, in the
specified folder and repeat step (5) and after.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-98
Fig. 6-99
e-STUDIO200L/202L/203L/230/232/233/280/282/283
6 - 93
07/05
FIRMWARE UPDATING
6