Toshiba e-STUDIO230L Service Handbook page 248

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
1372 Counter Heater and energizing time
accumulating counter Dis-
play/0 clearing
1376 Counter Toner cartridge drive
counter
1378 Counter Counter for period of time
fuser unit is at ready tem-
perature
1380 Counter Counter for period of time
fuser unit is at printing tem-
perature
1382 Counter Counter for period of time
fuser unit is at energy sav-
ing temperature/Counter
reset
1385 Image Number of output pages
process- (Thick paper 1)
ing
1386 Image Number of output pages
process- (Thick paper 2)
ing
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 212
07/11
Default
<Accept-
RAM
able
value>
0 M Counts up the heater
<8 digits> control time accumu-
lated (when power of
the equipment is ON)
but does not count at
the Sleep Mode. When
the counter value of the
fuser roller is cleared,
this counter value is
also cleared in sync at
the PM support mode.
0 M Counts the rotation
<8 digits> number of the toner
cartridge.
0 M Counts up the heater
<8 digits> control time accumu-
lated (when the equip-
ment is at ready status).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up the heater
<8 digits> control time accumu-
lated (during printing).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up the heater
<8 digits> control time accumu-
lated (when the equip-
ment is in the Energy
Saving Mode).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up when the
<8 digits> registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at the PM support
mode.
0 M Counts up when the
<8 digits> registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
1
1
1
1
1
1
1