Toshiba e-STUDIO230L Service Handbook page 667

(5) Check the items to be updated.
The screen for selecting the items to be updated is displayed after 3 minutes. "*" is displayed
next to the items to be updated. (When the FORM basic section software version of the equip-
ment is "V1.00/1.12" or earlier: All items other than "0. OS Update" are selected in the default
settings. When the FORM basic section software version of the equipment is "V1.00/4.22" or
later: All items are selected in the default settings.)
When the FROM basic section software version of the equipment is "V1.00 / 1.12" or earlier:
Note: Note:
The display of items on this screen varies depending on the types of data written on the USB
storage device. Each item is displayed only when each data file is written on the USB storage
device in the following conditions.
Item
0. OS Update
1. HDD Update
2. UI Data Update
3. System Firmware Update
4. Engine Firmware Update
5. Scanner Firmware Update
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-95
Condition
firmImage0.bin is written.
All master data files (1, 2, 3 ... n) are written.
firmImage0.bin is written.
firmImage0.bin and firmImage1.bin are written.
firmImage2.bin is written.
firmImage2.bin is written.
6 - 91
07/05
e-STUDIO200L/202L/203L/230/232/233/280/282/283
FIRMWARE UPDATING
6