(7)
Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
When the FROM basic section software version of the equipment is "V1.00 / 1.12" or earlier:
Status display during update
OS Update .......
HD Data Update .......
UI Data Update .......
SysFirm Update .......
Engine MAIN Update ..Flash Update
Scanner Firm Update..Flash Update
When the FROM basic section software version of the equipment is "V1.00 / 4.22" or later:
Status display during update
OS UI Update .......
HDD SYS Update .......
Engine MAIN Update .......Flash Update
Scanner Firm Update .......Flash Update
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-102
Status display when update is completed
Fig. 6-103
Status display when update is completed
e-STUDIO200L/202L/203L/230/232/233/280/282/283
6 - 95
06/10
FIRMWARE UPDATING
6