Toshiba e-STUDIO230L Service Handbook page 196

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
255 Paper PFP/LCF installation
feeding
256 Paper Paper size setting /LCF
feeding
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Func-
Items
tion
ALL
ALL
2 - 160
05/11
Default
<Accept-
RAM
able
value>
0 M Sets the installation sta-
<0-4, tus of the PFP or LCF,
16-20, and also disables its
32-36> functions and the lower
drawer of the equip-
ment.
When "0" is set at 08-
477, specify the value
from 1 to 4 or 16 to 20,
and when "1" is set at
08-477, specify the
value only from 32 to
36.
0: Auto
When only the upper
drawer is installed as
the paper feeder of the
equipment.
1: PFP upper-drawer
type installed
2: PFP upper-drawer
and lower-drawer
type installed
3: LCF installed
4: Disables PFP or
LCF
When the upper and
lower drawers are
installed as the paper
feeder of the equip-
ment.
16: PFP and LCF not
installed
17: PFP upper-drawer
type installed
18: PFP upper-drawer
and lower-drawer
type installed
19: LCF installed
20: Disables functions
of PFP or LCF
Disables the lower
drawer when the upper
and lower drawers are
installed as the paper
feeder of the equip-
ment.
32: PFP and LCF not
installed
33: PFP upper-drawer
type installed
34: PFP upper-drawer
and lower-drawer
type installed
35: LCF installed
36: Disables functions
of PFP or LCF
EUR: A4 M Press the button on the
UC: LT LCD to select the size.
JPN: A4
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
1
9