Toshiba e-STUDIO230L Service Handbook page 654

Hide thumbs Also See for e-STUDIO230L:

Table of Contents

Updating can be continued with another USB storage device on which the firmware data is writ-

ten in the following procedure when the updating is completed.

1. Confirm the message "Please Connect Next Storage Key. Push 'START' Button!!" is dis-

played at the bottom of the LCD screen.

2. Replace the USB storage device while the power is left ON.

3. Press the [START] button.

4. The screen for selecting the items to be updated is displayed. Continue the updating from

procedure (5). However, the items already updated are not displayed on the screen.

"Update Failed." is displayed at the bottom of the LCD screen when the updating is not com-

pleted properly. Turn OFF the power, and then check the following items. After confirming and

clearing the problems, restart updating from the beginning.

Does the USB storage device meet the conditions to be used for updating (

Firmware Updating with USB Storage Device (e-STUDIO200L/230/280)")?

Is the data file written properly on the USB storage device?

Is the USB storage device installed properly?

Do the USB storage device and equipment operate properly?

e-STUDIO200L/202L/203L/230/232/233/280/282/283

FIRMWARE UPDATING

Show Quick Links

Chapters

Table of Contents