Toshiba e-STUDIO230L Service Handbook page 544

[3D30] FAX board error
This error occurs when the FAX board is not installed or the FAX board has an abnormality.
Check if the FAX board is correctly connected.
[3E10] POP3 server connection error
Check if the IP address or domain name of the POP3 server set for this equipment is correct, or check
if POP3 server to be connected is operating properly.
[3E20] POP3 server connection time-out error
Check if POP3 server to be connected is operating properly.
Check if the LAN cable is correctly connected.
[3E30] POP3 login error
Check if the POP3 server login name and password set for this equipment are correct.
[3E40] POP3 Login Type ERROR
Check that the login type (Auto, POP3 or APOP) to the POP3 server is correct.
[3F00] [3F10] [3F20] [3F30] [3F40] File I/O error
These errors occur when the mail data is not transferred properly to the HDD.
Request the sender to retransmit the mail.
Replace the HDD if the error still occurs after retransmission.
[4030] No printer kit/Invalid
Install the print kit and perform the job again.
Install the Expansion Memory (GC-1230) and perform the job again.
Register it officially and perform the job again.
[4031] HDD full failure during printing
Reduce the number of pages of the job in error and perform the job again.
Check if the server or local disk has a sufficient space in disk capacity.
[4032] Private-print-only error
Select "Private", and then perform the printing again.
[4033] Printing data storing limitation error
Select "Print", and then perform the printing again.
[4034] e-Filing storing limitation error
Select "Print", and then perform the printing again.
[4035] Local file storing limitation error
Select "Remote" (SMB/FTP) for the destination of the file to save.
[4036] User authentication error
Perform the authentication or register as a user, and then perform the printing again.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
TROUBLESHOOTING
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
5 - 92
07/11