Table of Contents
Advertisement
4.7.2. Link Aggregation
4.7.2.a. About Link aggregation
Link aggregation is a function that is possible to increase redundancy of network paths and
bandwidth between Switching Hubs by grouping multiple ports to a trunk for connection.
In this Switching Hub, up to 8 ports can be assigned to 1 group, and 8 groups can be
created.
When using both Link Aggregation and Access Control functions, assign a practical physical
port number to a port list of access control, not a logical port created in Link Aggregation.
For details, refer to 4.7.4.
Note:
If port communication modes are mixed, Link Aggregation cannot be configured. In
addition, Link Aggregation and Internet Mansion mode cannot be used simultaneously.
Note:
Depending on number of ports in a group or the traffic condition, traffic may not be
assigned uniformly to all the ports.
83
Advertisement
Table of Contents
