Table of Contents
Advertisement
Available commands are listed below.
S
Set the IP address of the TFTP server providing the firmware to be used for update.
Press "S." The command prompt changes to "Enter IP address of TFTP server>." Enter the
IP address of the TFTP server.
F
Set the file name of the firmware to be upgraded.
Press "F." The command prompt changes to "Enter file name>." Specify the file name of the
downloaded program within 30 one-byte characters.
U
Start upgrading.
Press "D." The command prompt changes to "Download file(Y/N)>." Confirm whether or not
you wish to start the process. Confirm that all settings are correct. Press "Y" to start upgrading.
If you find any incorrect setting, press "N" to reset the settings.
Q
Return to the previous menu.
134
Advertisement
Table of Contents
