Table of Contents
Advertisement
Available commands are listed below.
N
Set a name of VLAN.
Press "N." The command prompt changes to "Enter VLAN name>." Enter a VLAN name within 30
one-byte characters.
P
Set a member of VLAN.
Press "P." The command prompt changes to "Enter egress port number>." Enter a port number you
wish to set.
When entering multiple port numbers, delimit with comma with no space, or hyphenate the continuous
numbers.
A
Apply modification of VLAN configuration.
Press "A" to apply the setting.
Q
Return to the previous menu.
80
Advertisement
Table of Contents
