Table of Contents
Advertisement
4.6.8.c. Displaying All MAC Addresses
On the Forwarding Database Information Menu, pressing "M" opens the Display MAC Address
by MAC screen, as shown in Fig. 4-6-19. In this screen, you can display all MAC address
tables in this Switching Hub.
PN28160/PN28160A Local Management System
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time:
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Age-Out Time:
Shows a time to store MAC address table. It is equal to the time after receiving the last
packet. The factory default setting is 300 seconds (5 minutes).
MAC Address
Shows the MAC address in MAC address table.
Port
Shows the port to which the MAC address has belonged.
Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next port.
P
Show the previous page.
Press "P." The screen shows the previous port.
A
Set a time to store MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Out time with a value
of 10 to 1000000 (seconds).
Q
Return to the previous menu.
300 Sec.
Port
----
Set [A]ge-Out Time
[Q]uit to previous menu
Fig. 4-6-19 Displaying All MAC Addresses
66
Advertisement
Table of Contents
