Table of Contents
Advertisement
Available commands are listed below.
N
Set a NAS ID (NAS Identifier).
Press "I." The command prompt changes to "Enter NAS ID>." Enter NAS ID within 16 one-byte characters.
I
Set an IP address of RADIUS server.
Press "A." The command prompt changes to "Enter IP Address for RADIUS server>." Enter an IP
address.
C
Set a common key of RADIUS server.
Press "C." The command prompt changes to "Enter secret string for server>." Enter a common key
within 20 one-byte characters.
R
Set a response time until the RADIUS server responds to authentication request.
Press "R." The command prompt changes to "Enter response time>." Enter the response time with
a value of 1 to 120 (seconds).
M
Set the maximum number of retransmission times for authentication request.
Press "M." The command prompt changes to "Enter maximum retransmission>." Enter an integer number
of 1 to 254.
Q
Return to the previous menu.
58
Advertisement
Table of Contents
