Table of Contents
Advertisement
S
Enable/disable the AUTO-MDI function.
Press "S." The command prompt changes to "Enter port number>." Enter a port number (from 1
to 16) you wish to change. Press "0" to change the settings of all ports at a time. Then, the command
prompt changes to "Enable or Disable Auto-MDl for port # (E/D)>." Press "E" to enable the function.
Press "D" to disable it. As the change is applied, the display on the screen is updated automatically.
Q
Return to the previous menu.
Note:
The screen shows the port status; however, the status is not automatically updated.
To display the latest status, press any key.
46
Advertisement
Table of Contents
