Arp Table - Panasonic PN28160A Operation Manual

4.6.10. ARP Table

On the Basic Switch Configuration Menu, pressing "R" opens the ARP Table screen, as shown
in Fig. 4-6-22. In this screen, you can refer and configure ARP table.
PN28160/PN28160A Local Management System
Basic Switch Configuration -> ARP Table
Sorting Method :
ARP Age Timeout : 7200 seconds
IP Address
---------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set ARP Age [T]imeout
[S]orting Entry Method
Command>
Enter the character in square brackets to select option
Screen Description
Sorting Method
ARP Age Timeout
IP Address
Hardware Address
Type
By IP
Hardware Address Type
----------------- -------
[A]dd/Modify Static Entry
[D]elete Entry
[Q]uit to previous menu
Fig. 4-6-22 ARP Table
Shows the order of displaying.
By IP Shows the table in the order of IP address.
By Static Shows manually-set addresses.
By Dynamic Shows auto-learned addresses.
Shows the age-out time of ARP table.
Shows the IP address on ARP table.
Shows the hardware address on ARP table.
Shows the type on ARP table.
Static The address is manually set.
Dynamic The address is auto-learned.
70