Table of Contents
Advertisement
Screen Description
System up for
Shows accumulated time since the Switching Hub boot-up.
Boot Code
Shows the version of Boot Code.
Version
Runtime Code
Shows the version of Runtime Code.
Version
(Upgrading firmware version described in 4.9.1 is applicable to Runtime Code.)
Hardware
Shows the hardware information.
Information
Version
DRAM / Flash Size
Administration
Items shown here are configured in accordance with "4.6.1 System Administration
Information
Configuration."
Switch Name
Switch Location
Switch Contact
System Address
Items shown here are configured in accordance with "4.6.2 System IP Configuration."
Information
MAC Address
IP Address
Subnet Mask
Default Gateway
Shows the hardware version information.
Shows capacities of mounted DRAM and Flash memory.
Shows the name of the Switching Hub. No information is set on
shipment.
Shows the installation location of the Switching Hub. No information
is set on shipment.
Shows contact information of the Switching Hub. No information
is set on shipment.
Shows the MAC address of this Switching Hub. This value is uniquely
assigned to each device and cannot be changed.
Shows the Switching Hub's current IP address. 0.0.0.0 is displayed
because no address is set on shipment. For configuration details,
refer to 4.6.2.
Shows the Switching Hub's current subnet mask. 0.0.0.0 is
displayed because no address is set on shipment. For configuration
details, refer to 4.6.2.
Shows the IP address of the router for the default gateway. 0.0.0.0
is displayed because no address is set on shipment. For
configuration details, refer to 4.6.2.
28
Advertisement
Table of Contents
