Table of Contents
Advertisement
Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next port.
P
Show the previous page.
Press "P." The screen shows the previous port.
S
Switches the status of auto-learning.
Press "S." The command prompt changes to "Select Port Number to be changed>." Enter a port number
you wish to change the setting. Then, the command prompt changes to "Change MAC Learning Mode
for port # (specified port number)>." Press "A" to enable auto-learning. Press "D" to disable the
mode.
L
Set the limit number of MAC address auto-learning.
Press "L." The command prompt changes to "Select Port Number to be changed>." Enter a port number
you wish to change setting. Then, the command prompt changes to "Enable or Disable MAC Learning
Limit status for port # (specified port number) (E/D)>." Press "E" to set a limit value for the number
of auto-learning. Then, the command prompt changes to "Enter MAC Limit number>." Enter a value
of 1 to 256. Press "D" not to set a limit for the number of auto-learning.
Q
Return to the previous menu.
65
Advertisement
Table of Contents
