Table of Contents
Advertisement
Screen Description
Console UI Idle
Shows the idle timeout settings (in minutes) for terminating a console-connected session
Time Out:
if no input is made. The factory default setting is 5 minutes.
Telnet UI Idle Time
Shows the idle timeout settings (in minutes) for terminating a Telnet-connected session
Out:
if no input is made.
The factory default setting is 5 minutes.
Telnet Server:
Shows the Telnet access settings.
The factory default setting is "Enabled."
Enabled
Disabled
SNMP Agent:
Shows the SNMP access settings.
The factory default setting is "Disabled."
Enabled
Disabled
IP Setup
Shows the access settings for the IP address configuration software, bundled with the Panasonic
Interface:
network cameras. The factory default setting is "Enabled." * For instructions, refer to Appendix
C.
Enabled:
Disabled:
Local User Name:
Shows the current login user name.
The factory default setting is "manager."
Login Method
Shows the method of verifying the user name and password at login.
The factory default setting is "Local" for 1 and "None" for 2.
Local
RADIUS
None
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
The user name and password set in this Switching Hub is used for login.
Authentication by RADIUS server is used for login.
Not used. (Only for Login Method 2.)
53
Advertisement
Table of Contents
