Table of Contents
Advertisement
Available commands are listed below.
I
Set an out-profile index number.
Press "I." The command prompt changes to "Enter Out-Profile action index>." Enter an index
number with a value of 1 to 65535.
D
Deny/permit packets.
Press "D." The command prompt changes to "Select Deny/Permit (1-2)>." Press "1" to
deny packets. Press "2" to permit them.
C
Set the committed rate.
Press "C." The command prompt changes to "Enter committed rate>." Enter the committed
rate with a value of 1 to 1000.
B
Set the burst size.
Press "B." The command prompt changes to "Select burst size (1-5)>." Press "1" for 4K
in the traffic burst size exceeding the committed rate, "2" for 8K, "3" for 16K, "4" for 32K,
and "5" for 64K.
S
Set a DSCP value to be marked.
Press "S." The command prompt changes to "Enter DSCP value>." Enter a DSCP value of
0 to 63.
A
Apply the setting. If not applied here, the setting will be discarded.
Q
Return to the previous menu.
104
Advertisement
Table of Contents
